When you are completing a tile wood laminate flooring installation project. One of the final stages is the installation of the transitions. A transition floor gives a finished look to the place in a portal that joins two different types of floors. A transition also makes it easier to walk between rooms by eliminating any sharp edges between the floors. There are several ways to make the transition between a laminate floor and a tile floor. That gives a professional finished look to your project.
If your laminate floor and tile floor are a little different in height. You should use a regulator for the transition from the highest floor to the lowest floor. A tile reducer is a piece of vinyl used when the level of tile floor is higher than laminate flooring, and a laminate reducer is used when the level of the laminate floor is greater than the tile floor. Choose the color reducer to match the floor.
12 Picture Gallery: Laminated Tile Wood Transition Project
In some cases, the transition between a laminate floor and the tile may be too high for a reducer to work. In this case the installation of a decorative end cap as a transition. The end cap is a metal, rubber or vinyl finish piece and is formed at a 90-degree angle. The horizontal part of the end cap is installed on the top floor surface, while the vertical part meets the bottom floor surface. End caps can be as wide as 1 inch but can be cut to fit any height.
This post topic: Wood Tile